Hi, Domingos,
If you want to come to some flights figures closer to what you had with the MAAM-SIM R4D (cruise speed, and fuel flow mainly), there are some variations in the aircraft.cfg of the C-47 you might like to try, although I did not up to now succeed in reducing substantially the C-47 climb speed...
Hereunder my own tweaks :
[GeneralEngineData]
engine_type = 0 //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop
Engine.0 = -9.50, -11.3, -2.3 //(feet) longitudinal, lateral, vertical distance from reference datum
Engine.1 = -9.50, 11.3, -2.3 //(feet) longitudinal,lateral, vertical distance from reference datum
;fuel_flow_scalar= 0.82 //adj. to 625 HP @5000 ft 80 USG/hr (original value) <---
fuel_flow_scalar= 0.85 //adjust for total 90 USG/hr. @5000 ft (moded value) <---
min_throttle_limit = 0.0 //Minimum percent throttle. Generally negative for turbine reverser
master_ignition_switch = 1 //Master Ignition Switch
[piston_engine]
;power_scalar = 0.946 //adjustment to 1200 HP //Piston power scalar (original value) <---
power_scalar = 1.100 //adjustment to 140 kts //Piston power scalar (moded value) <---
cylinder_displacement= 130.71 //Cubic inches per cylinder
Now, if you do not want P3D to record your C-47 flights as amphibian into the P3D flight logbook, you have to comment out two lines into the [contact points] section :
//point.10=4, -18.65, -9.1, -4.5, 1500, 0, 0.00, 0, 0.50, 3.00, 0.50, 0.0, 0.0, 4.0, 0.0, 0.0
//point.11=4, -18.65, 9.1, -4.5, 1500, 0, 0.00, 0, 0.50, 3.00, 0.50, 0.0, 0.0, 4.0, 0.0, 0.0
The way the C-47 is modelled, you can not include the FT Timer directly into the panel. But you can add a pop-up window into the panel.cfg to call the relevant gauge, provided you have already this gauge into your "gauges" folder (at my side, using Shift + 7 to call this window...).
Caution, I have reduced the background of the original gauge, and can send the gauge to you if you let me have a mail address (direct as enclosed file, or via dropbox or wetransfer).
Herebelow my own GAAR panel.cfg. Only check inside about [Window06]. I have P3D v4.1, and consequently my panel calls the x64 Doug Dawson gauges...
// This Panel.cfg file created by FS Panel Studio panel editor utility -
www.fspanelstudio.com// Built Sunday, March 10, 2013 at 15:50 FSPS Build:20207
// changed Aug 10 HN
// changed Sep 3 HN
// changed Sep 11 HN
// changed Oct 16 MJ
[Window Titles]
Window00=Main Panel
Window01=Fuel and Payload
Window02=Control Panel
Window03=Monitor
Window04=Clipboard
Window05=GPS
Window06=FT Timer
Window10=Monitor Help
Window11=Keys
//--------------------------------------------------------
[Window00]
Background_color=0,0,0
size_mm=1024
position=2
visible=1
ident=MAIN_PANEL
gauge00=C47!Main, 0,0,1,1
//gauge01=fsx_event_logger!event_logger, 0,600,120,73
//--------------------------------------------------------
[Window01]
Background_color=0,0,0
size_mm=220,376
pixel_size=275,470 //220,376 ori
position=0
visible=0
ident=10003
window_pos=0.00, -0.08
type=SPECIAL
gauge00=C47!Status, 0,0,275,470
gauge01=dsd_p3d_fuel_dump_x64!fuel_dump, 2,2,2,2
gauge02=dsd_p3d_fuel_dump_x64!display, 10,820,515,63
;gauge01=dsd_fsx_fuel_dump!display, 10,850,515,63
//--------------------------------------------------------
[Window02]
Background_color=0,0,0
size_mm=220,376
pixel_size=275,470 // 220,376 ori
position=0
visible=0
ident=10004
window_pos= 0.00, 0.80
type=SPECIAL
gauge00=C47!Control, 0,0,275,470
//--------------------------------------------------------
[Window03]
Background_color=0,0,0
size_mm=924,150
pixel_size=924,150
visible=1
ident=10001
window_pos= 0.45, 0.05
type=special
gauge00=Monitor!mon, 0,0,924,150
//--------------------------------------------------------
[Window04]
Background_color=0,0,0
size_mm=275,406
pixel_size=275,406
visible=1
window_pos= 0.45, 0.925
type=special
ident=10014
gauge00=Clipboard!clipboard, 0,0,275,406
//--------------------------------------------------------
[Window05]
Background_color=0,0,0
size_mm=416,338
window_pos= 0.58, 0.53
visible=0
ident=GPS_PANEL
//window_pos= 0.000, 0.090
gauge00=fs9gps!gps_500, 0,0,416,338
//--------------------------------------------------------
[Window06]
Background_color=0,0,0
size_mm=78,31 // amend for FTime
window_size_ratio=1.000
position=6
visible=0
ident=9020
type=SPECIAL
gauge00=Digital!FTime, 0,0,77,30
//--------------------------------------------------------
[Window10]
Background_color=0,0,0
size_mm=800,600
pixel_size=800,600
position=4
visible=0
ident=10000
gauge00=Monitor!help, 0,0,800,600
//--------------------------------------------------------
[Window11]
Background_color=0,0,0
size_mm=1,1
position=0
visible=1
ident=10002
nomenu=1
type=SPECIAL
gauge00=C47!Keys, 0,0,1,1
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=1
pixel_size=1024,1024
texture=$C117_01
gauge00=Douglas_C47!Main, 0,0,1,1
gauge01=C47!Main, 0,0,1,1
gauge02=C47!Sim_C47, 0,1,1,1
gauge03=C47_dsd_p3d_xml_sound!Sound, 1,1,1,1,/DGSounds/CockpitSounds_C47.ini
gauge04=DGSounds!KeyEvent_SND_C47, 0,0,1
gauge05=dsd_p3d_window_status_x64!window_status, 436,413,15, 15, 75
;gauge03=C47_DSD_FSX_XML_Sound!Sound, 1,1,1,1,/DGSounds/CockpitSounds_C47.ini
;gauge05=dsd_window_status2!window_status, 436,413,15, 15, 4
//--------------------------------------------------------
[VCockpit02]
background_color=0,0,0
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$dc_panel
gauge00=radiosvvc!RadioDME, 11,625,230,130
gauge01=radiosvvc!comm1, 0,0,355,171
gauge02=radiosvvc!nav1, 368,0,355,171
gauge03=radiosvvc!comm2, 0,187,355,171
gauge04=radiosvvc!nav2, 368,184,355,171
gauge05=radiosvvc!adf, 0,369,355,171
gauge06=radiosvvc!xpond, 143,551,870,61
;gauge07=radiosvvc!DH125_RMI, 254,622,305,305
Day=255,255,255
Night=210,120,20
Luminous=228,64,64
[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143
Blue skies
Philippe
DCA0565